.jpg)
.jpg)
.jpg)
Description
Didn't find what you're looking for?
Post your buying leads to let suppliers contact you directly or
contact our customer service specialist
for help!
1.The machine is capable to work with plastic - or woven fabric ribbon 8 to 30 mm wide. Bow sizes range from 1.5''mm to 4.5'’ mm in diameter.
2.The ribbon is supplied from spools or rolls which are attached to a rack at the back side of the machine. The carrier band with the adhesive label is supplied from a roll to the winding head area. The ribbon is fed tensionless to the winding head through a compensation roll. Electronic controls combined with modern step motor technology guaranties a continued precise operation.
3.The ribbon is guided in the slidable mounted ribbon guiding system. The supplied material is pushed into the needles of the winding head during the downwards movement of the guiding system. Dependant on the amount of loops the winding head turns a arch, defined by the electronic controls. The ribbon guiding system moves forward again and repeats this cycle until the preset amount of loops is reached.
4.The carrier band with the adhesive label is supplied to the winding head. It is stitched together with the unfinished bow with a staple formed by the stitcher out of wire material during the stapling process. The ribbon is cut and the finished bow is ejected. The cycle starts again.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
